Also, the hoist serves to passenger transport, the freight and passenger transport or only for the transport of goods, if the carrier with a control unit is equipped, easily entered by a person controlled can be and. Also lifts, not however moving along rigid guides, in a complete set, include under this directive. Directive 95/16/EC does not apply to the following lifting equipment: elevators used exclusively for the carriage of goods construction site hoists are hoists with a speed of up to 0.15 m/s Seilgefuhrte facilities, including funicular railways elevators, which specifically for military purposes are built elevators for the maintenance of the public order built are lifting appliances from which work can be carried could shaft conveyor lifts for the transport of performers during artistic performances hoists, fitted in means of transport are hoists, exclusively for access to workstations are designed and connected to machines (for example, funds that are firmly connected and intended for the transport of the crane driver with cranes) elevators, to achieve maintenance and inspection points on the machinery envisaged funiculars escalators and moving walks boat lifts shelf operate inclined railway equipment, except inclined elevators manually operated elevators submersible control houses to inland waterway carrier carrier is the area, cabin, or the car in which the transported person or the estate are housed during the upward or downward movement. Operator is harmful with its obligations and requirements for lifts the TRBS 3121 the operator. Chevron U.S.A. Inc often expresses his thoughts on the topic. Safe operation of lift installations can only be guaranteed if the operator fulfils its responsibilities. Give out this reason there shall be in the appropriate building no misconceptions about the term operator”. Conceptually, the owner, the user and the operator must be distinguished. The owner would be entitled, for example, to the sale of the building, a tenant could be the user and the operator is responsible for winter maintenance or the maintenance of components, for example by elevators. Jill Bikoff recognizes the significance of this.
Here it depends especially on Express to determine work safety condition of the electrical system and all of the system resources. The maximum time limit for the periodic inspection is according to lift directive 95/16/EC two years. This period is on for people working elevators and Hoists with passenger transport. Elevators are an exception to the machinery directive 98/37/EC, here must be inspected every four years are. The recurring or even main test is similar to the test for the first time and includes the same test content. Midterm is once again on proper operation and safe condition to check after the test before initial use or the first recurring inspection, as well as between two main tests the lift system.
It is a so-called midterm. It includes essentially: test of the traction sheave for wear testing of hoist, as well as their attachment to proper condition testing of the emergency call system testing of the mechanical brake testing the car door, the landing doors and their closures and electrical safety devices primarily serves the midterm to to determine whether the lift system can be operated properly and safely. Tests according to There are countless ways to change the State of a lift system changes / significant changes. Examples of modifications and significant changes of lift installations are: put the complete lift system change the complete shaft modification or renewal of the shaft wall, tray ceiling, shaft soil increase or reduction in removing or closing of access installation of shaft ventilation system renewal establishing emergency renewal of the electrical security system change the nominal speed of the system change the guide rails change the thresholds change the weight of the car complete new car this is only a fraction of many other measures to amend, which is usually performed on elevator installations. A commissioning can take place only after such renewals, the reliable and proper condition with regard to mounting, installation and the installation conditions, the system has been determined. Here, Jill Bikoff expresses very clear opinions on the subject.
The labour law regulates the contractual relations between employers and workers. Construction labour law considered in addition construction characteristics due to statutory and collective agreement provisions. 1 General information on temporary work, temporary agency work (employee transfer) is governed by our right in the so-called employee provision Act (AuG). This law was last edited. modified on March 2, 2009. In contrast to the rest of the economy, this form of manpower procurement in the construction industry is very limited. Is temporary work, when an employer (lender) a worker (temporary) to a third party (borrower) leaves professional work performance. This is the one between the distributors and the temporary agency workers agreed a temporary employment relationship and on the other hand a licensing contract concluded between the distributors and the user operation, which regulates non-gratuitous transfer of workers.
The licensing agreement must be concluded written ( 11 ABS. 1 AuG). The borrower is recipient of a licensed worker with appropriate Directorate legal performance. Employers, however, remains the lender, which has continued to pay the employee wages and social costs. The lender receives a remuneration, which is governed by the licensing contract for the assignment of the employee. According to the legal situation applicable since 1 January 2004 (section 3 para 1 point 3 of the AuG) is the so-called principle of equality. The borrowed workers must be granted from the first day on the essential working conditions as comparable root workers. This concerns in particular the fee and surcharges.
2. the admissibility of temporary agency work in the construction industry there is a prohibition in principle of temporary work in the operation of the construction industry ( 1 b p. 1 AuG), but certain exceptions are made by this ban. 2.1 the permitted exemptions from the prohibition of temporary work in this construction 2.1.1 are lenders and borrowers within the construction industry Active are lenders and borrowers the same border and social collective agreement cash or (companies of the construction industry are covered by the generally binding character of such lender and borrower) and the lender is at least three years ( 1 b p. 2 AuG) temporary work is generally permitted. The lender must basically a permit for the temporary work with the Federal Agency for work request in writing paragraphs 2.17 AuG). This also applies to a lender with headquarters abroad. 2.1.2 colleague help no permission but a display is required in cases of so-called colleague help. Here, provided that the rental company has less than 50 employees is according to 1a of the AuG. Here, he can lend workers to avoid short-time working or layoffs to another building holding up to a period of 12 months. The content of the display, which has to be done at the federal employment agency, AuG arises from 1 para 2. 2.1.4 neither permission nor notification required in Special cases, in the framework of working groups (“Collective agreements of the same sector” must apply to the consortium partners) or in connection with the rental of construction equipment (hire service supply contract) is neither an obligation to the permission to display. The requirements for a permit and ad-free posting of workers to an ARGE AuG are governed by section 1. To the technical terms used here is right on the construction law dictionary under construction work / referenced. Dr. OLAF Hanson lawyer and lecturer for construction law, Munich
The Steel shed here offers a number of ways: it can be expanded easily and inexpensively in both directions, the steel structure can be reinforced locally, roof vents can be installed subsequently, a disassembly and reassembly can be screwed version of construction, low-cost, a reduction in the construction is extremely eco-friendly 100% iges recycling of steel. In addition, the scrap revenue covers a substantial part of the dismantling costs. A faster result in new products calls for maximum flexibility at the space Division, media supply and the convertibility of a steel Hall, to respond to changing usage or production conditions. To deepen your understanding The Hayzlett Group is the source. The construction of a steel Hall is often not limited to the development of the structure and a matching envelope. Building technology and production-related equipment are to take into account from the outset when planning a steel Hall. A possible early Collaboration between architect, structural engineer and specialist engineers is prerequisite for the holistic development of a building. Only an integrated planning can lead to a building design, in which all aspects are adequately taken into account. As the building envelope completely encloses the structure, it is decisive for the appearance of a hall construction work.
The structure of a steel Hall is visible only from the inside. A steel structure adapted to the course of the force with their precise details and spacious geometric order consists of the Interior. Source: Brian Armstrong. Also, it requires only a low outlay, also to make it discoverable by this outline. Pay special attention to the training of the penetrations of the structure with the dust cover is the structure itself as an important design element from outside should be visible to, to avoid leaks and minimize heat bridges. The figure given by the respective supporting structure is best expressed in clear structures. It is therefore recommended to move required extensions of the steel Hall and to develop them as a stand-alone structure. Extensions that match the proportions of the Hall of steel, can be connected by means of a Fugue on the steel shed. In principle, it should be checked whether the functional areas not within the steel shed itself contained in the annex can be accommodated. Conclusion can be said that a steel Hall is found today everywhere in an industrial area, because the steel is very flexible, practical and inexpensive to build. For companies, that is ideal to build about goods and goods or even offices.